Roberts colourSTREAM Manual de instrucciones descargar pdf (Pagina 16)

100

Connecting to your computer network - cont.

15. If your network is not found, it may be because the router is conﬁ gured

not to broadcast the SSID. You should then scroll through the menu

and select Manual settings option in order to enter the network details

manually. This is described in 'Manual Network Conﬁ guration', see

page 18.

If your network name is being broadcast, and it was not found, then

try re-scanning (press the Back button), and if necessary try moving

your radio to a location closer to your access point / router.

16. When the SSID for the wireless network you wish to connect to appears

on the screen, touch to select. If WiFi Protected Setup (WPS) was

indicated, you will see an additional menu at this point, otherwise

proceed to step 17.

Choose one of the WPS menu options as required for your router

(WPS may be via push button, or using an identiﬁ cation number).

'Push Button' - the display prompts you to press the WPS button on

your router or access point and touch OK on screen. The two devices

should then connect with the encryption key sent automatically to the

radio.

'PIN' - the display shows an identiﬁ cation number which you must

enter into your router using a web browser (refer to your router's user

documentation). Then touch OK on screen on the radio. The two

devices should then connect with the encryption key sent automatically

to the radio.

'Skip WPS' - if you wish to enter the encryption key yourself.

If you chose Push Button or PIN the screen will then show 'Connecting...'

and then 'Setup wizard completed'. Touch OK to exit the setup wizard

and then go to paragraph 20 on the next page.

17. If your network is conﬁ gured without an encryption key, the screen

should say 'Connecting...', and then 'Setup wizard completed'. Touch

OK to exit the setup wizard and enter Standby mode.

If this is the case then you have successfully connected your radio to

your network, so please go to paragraph 20 on the next page.

18. If the screen displays 'Network Key:', it is because the network is

using one of the encryption systems: Wired Equivalent Privacy (WEP)

or WiFi Protected Access (WPA). You will need to enter the correct

WEP or WPA key into the radio to allow it to communicate with your

wireless network. If you do not have the WEP or WPA key, then you

should obtain it from the person who set up your network. Some

wireless routers may come with an encryption key already set up by

the supplier, in which case you should refer to the documentation

provided with it. WPA is used here to also include WPA2.

Setup Wizard

00:00

Paul’s network <WPS>

Manual settings

Network Wizard

Network key:

Setup Wizard

123

123 - JONES

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 99 100

Comentarios a estos manuales

Sin comentarios

Roberts colourSTREAM Manual de instrucciones Pagina 16

Comentarios a estos manuales

Relacionado con productos y manuales para Las radios Roberts colourSTREAM