Roberts colourSTREAM Manual de instrucciones descargar pdf (Pagina 19)

100

If you need any further advice, please call our Technical Helpline on 020 8758 0338 (Mon-Fri)

Conﬁ guration

Manual network conﬁ guration

If you do not wish to use DHCP for automatic conﬁ guration, or if your network is conﬁ gured with a

hidden SSID, then you will need to enter some network settings manually. (Note - a hidden SSID

may prevent casual observers from detecting your network, but it is not recommended as a means of

network security.)

1. From the radios 'Settings'>'Network settings' menu, touch Manual settings. You must then choose

whether to connect using 'Wired' or 'Wireless' connections. If you choose 'Wireless' there are as

many as eleven settings screens, shown by the '1 of 11' progress marker at the top of the display. If

you choose 'Wired' there are seven screens and the progress marker will reﬂ ect this, although the

steps to set up the network parameters are basically the same.

2. The next menu asks whether you wish to use DHCP to conﬁ gure your network parameters (IP

address, subnet mask, gateway address, etc.). Unless you are familiar with networking and related

terminology, we recommend that you allow the use of DHCP. Choose DHCP Yes unless you need

to specify the network details manually.

If you have chosen 'Wired' and then DHCP Yes, your radio should now establish a connection to

the router using the Ethernet cable. Please skip to step 11 on page 20.

If you chose 'Wireless' and DHCP Yes, please skip to step 6 on page 19 in order to set up the

wireless connection details.

If you chose DHCP No for either connection method, the next step is to set up the IP address.

3. The manually speciﬁ ed IP address should be chosen to be compatible with the settings in your

router and must be a unique address on your network. If you are using DHCP for some devices and

static (manually conﬁ gured) IP addresses for others, the IP address used should fall outside the

range that the router may allocate using DHCP. Typically, the ﬁ rst three groups of digits will be the

same for all devices on your network (

Text entry is described on page 11). The display may show an

address of 0.0.0.0. To delete a character touch backspace. To clear, touch and hold the backspace.

Use digits and fullstop to enter the IP address, e.g. 192.168.1.25. Touch the tick symbol to conﬁ rm.

When the IP address has been entered, the subnet mask should be entered. The subnet mask

deﬁ nes which parts of the IP address are common across your network. For most small networks

the subnet mask will be 255.255.255.0 and this is entered in the same way.

4. The Gateway address is normally the IP address of the router through which the radio connects to

the internet and is entered in the same way as the previous addresses.

Settings

15:05 26 Jun 2010

Add Wired Network

Add Wireless Network

Manual settings [1/11]

IP address: [3/11]

Settings

192.168.1.25

(

;

‘

123

Settings

15:05 26 Jun 2010

Paul’s network <WPS>

Manual settings

Network Wizard

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 99 100

Comentarios a estos manuales

Sin comentarios

Roberts colourSTREAM Manual de instrucciones Pagina 19

Comentarios a estos manuales

Relacionado con productos y manuales para Las radios Roberts colourSTREAM